Samsung SMT-H4372 DVR swap function
Spectrum replaced a bad Motorola DVR with a Samsung SMT-H4372 DVR.
The "swap" button on the Motorola remote was very straight forward. You pressed "swap," which changed to the channel on the 2nd tuner. When you pressed swap again, you'd go back to the tuner's first channel you were on to start, Press swap again and you return to the 2nd tuner. Back and Forth. No problem.
The swap button's behaviour on the Samsung remote is unpredictable. You do switch to a new tuner but, most of the time, you end up switching to a different channel then expected.
Anybody figure out the logic to the swap button on a Motorola DVR?